next time you offend someone, take this decal and stick it, to let them know how you feel. Let the world know that the last thing on your mind is someone else's feelings. get your f*ck your feelings decal today and be sure to get extras, cuz you'll need em.

                             grunt style decals are crafted with the following details:

~width: 6" x height: 3.6875"

~premium vinyl material

~resistant to UV, temperature, humidity, and salt-spray

~outstanding durability and outdoor performance

                                               INSTALLATION INSTRUCTIONS

your die cut vinyl lettering will arrive in 3 layers

     your top layer is the transfer tape which holds the letters in place for easy installation

     middle layer, vinyl letters

     bottom layer, white wax paper backing which protects the letters and adhesive

1. spray glass cleaner and thoroughly clean window, use paper towel to wipe off excess cleaner. make sure the entire area is clean and dry.

2. put your vinyl lettering on a clean dry flat surface with the white wax paper facing            you.      run a squeegee over the wax paper with even, steady pressure to secure the        lettering      to the masking tape.

3. place the graphic sheet against the window, with the transfer tape side facing you            and the white wax paper backing facing the surface. place a strip of masking tape            down the center (between the letters if possible). secure with tape on all 4 corners.

4. remove corner tape on one side. gently lift the graphic sheet and slowly pull away the      backing at a 30-45 degree angle to prevent stretching or tearing. stop when you              reach the center tape line and use a razor blade to remove the loose paper backing.        at the same time make sure to continue holding the application tape away from the        window.

5. place your exposed vinyl graphic against the window and use a squeegee to firmly          apply the lettering to prevent air bubbles. for best results start in the center and work      your way outward both vertical and horizontal directions.

6. remove the masking tape and gently peel off the remaining backing paper on the            second half. then again gently squeegee the entire vinyl from the center, outward in        all directions, making sure you get rid of all air bubbles.